This Under-Counter "T" Adapter allows you to connect your Water Ionizer
water supply line directly to the cold water line below the sink. This
means that your ionizer will not be supplied with water from your
kitchen faucet. No faucet diverter and no hose will be attached to your
faucet. This is a big deal for many customers who regard a faucet
diverter and hoses to be messy. You ionizer will still be located on top
of your sink, but the water supply hose will be connected directly to
your cold water hose under your sink. No this means that you will need a
hole made on your sink.
Remember not all water ionizers can handle
water pressure against the water directly as you see being done here in
this video. Only ionizers with on and off switch on the ionizer itself
can make use of this adaptor like the Korean models. The Japanese models
like Leveluk, IE series, and Toyo Pure Porte II cannot make use
of the T-Valve Adaptor.
Standard Installation Instructions
1. Purchase your T-Adapter
unit is not used for an extended period of time (i.e. vacations), the
valve should be shut-off to prevent any damage to your unit or home.
2. Shut off both hot and cold water main supply at pipe under the sink
3. Locate the cold water supply line valve
4. Disconnect faucet cold water supply line from main cold water pipe –
use towel to catch small amount of water that may come from faucet
5. When connecting T-connection to cold water pipe, be sure to use
plumbing pipe thread seal tape (not included) to prevent leaks
6. Reconnect faucet cold water supply line to T-connection (now secured
to main cold water pipe)
7. Be sure all connections are secure but do not over tighten
NOTE: Do not
turn on main water supply until all hoses are properly installed to the
unit. Unit and components are subject to change without prior
notification in order to enhance performance.
For further assistance, please contact a qualified service technician or