Multi-Stage Cartridge Filter
customers with well water
Free & Fast
USA orders over $100.00
6 Stages of Filtration
Stage 1: Sediment Filter
exchange resin Layer,
See The List of Contaminants Removed (6 page PDF Report)
Why You Should Choose Our Multi-Stage Cartridge: It's the Best!
Our Multi-Stage Cartridge eliminates
literally hundreds of impurities
typically found in tap water to offer you great tasting, clean and pure drinking
water. It is also very attractive and economical. This 6
Stage Filtration system is a truly robust system and effectively removes
hundreds of contaminants from water. It is a solid state water filter which uses the
latest technologies that blend the adsorption capabilities of coconut shell
activated carbon with Eagle Redox Alloy®. This combination has been tested
to boost filtration capacity to remarkable levels.
6 Stage cartridge filter is designed to last between 1 year or treat up to
10,000 gallons of water*. You can tell when the
filter needs changing because it will either stop working or slow to
trickle. This unique water system is great for homes, apartments or office
Crystal Quest's 6 Stages of Filtration:
Water flows through pre
and post one - micron filter pads (1 micron equals 1/25,000th of an inch),
which removes suspended particles such as silt, sediment, cyst (Giardia,
Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.
Stage 2 and 3,
water flows through a bed of media made of a special high-purity alloy blend
of two dissimilar metals - copper and zinc (Eagle Redox Alloy® 6500, and
Eagle Redox Alloy® 9500.)
Eagle Redox Alloy®
is a major advancement in water treatment technology that works on the
electro-chemical and spontaneous-oxidation-reduction (REDOX) principles.
Chlorine is instantaneously and almost inexhaustibly oxidized. Tests on
Eagle Redox Alloy®/GAC cartridge have shown 99% chlorine removal even after
20,000 gallons of water passed through the filter. In comparison, carbon
cartridges of comparable volumes drop below 90% effectiveness after only
4,000 gallons. This is an important consideration.
Iron and hydrogen sulfide are oxidized into insoluble matter and attach to
the surface of the media. Heavy metals such as lead, mercury, copper,
nickel, chromium, cadmium, aluminum, and other dissolved metals are removed
from the water by the electrochemical process. They are attracted to the
surface of the media, much like a magnet. The media inhibits bacterial
growth throughout the entire unit. In fact, it has been shown to be reduced
up to 90%, eliminating the need for silver, which is commonly used in
carbon-only filters (silver is considered a pesticide by the EPA and, as
such, must be registered with them). Is copper or zinc added to the water in
any significant amount? On 2.3 ppm chlorinated water, <0.05 mg/l copper and
only 0.46 mg/l zinc were measured. The EPA aesthetic levels are 1.0 mg/l for
copper and 5.0 mg/l for zinc. Both zinc and copper are essential minerals
for good health - the FDA recommends a daily intake of 15 mg of zinc and 2
mg of copper.
water flows through ion exchange resins, reducing heavy metals such as lead,
copper, aluminum, and water hardness.
water flows through granulated activated carbon (GAC). GAC is universally
recognized and widely used as an effective adsorbent for a wide variety of
organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's,
benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's),
PCB's, MTBE's and hundreds of other chemical contaminants that may be
present in water causing bad taste and odors in your drinking water.
Carbon is extremely porous and provides a large surface area for
contaminants to collect. Carbon-only filters must also use their capacity
for chlorine removal, resulting in a shortened life. They also may use a
bituminous coal carbon, which is good at removing chlorine, but not as
effective at removing chemicals. We use a high-grade coconut shell carbon
that is most effective at removing chemicals. Coconut shell carbon provides
a significantly higher volume of micro-pores than either coal, wood or
lignite based carbon. As a result, it is more effective than other carbon
types in removing trihalomethanes (THM's) and other chemicals from
municipally supplied water. Since our REDOX media removes the chlorine
before it reaches the carbon, the carbon capacity is not wasted on chlorine
and is free to concentrate more effectively on organic contaminants.
In stage 6,
water flows through another one-micron filtration pad for further reduction
of undesirable particles. The end result is a great reduction or total
elimination of a wide variety of contaminants.
CRYSTAL QUEST 6 stages filtration cartridge
CRYSTAL QUEST 6 stages filtration cartridge - one-micron filter pad,
ERA-6500, ERA-9500, GAC, ion exchange resin, and another one-micron pad.
Removes hundreds of contaminants* from your drinking water. Used for low
flow such as countertop and undersink. Read more details of this
filter's 6 stage filtration
Here is a
of contaminants removed.
CRYSTAL QUEST 6 stages filtration cartridge
Capacity (<100 ppm hardness):
Design flow rate
1 to 1.5 GPM
125 PSI (8.6 bar)
20 PSI (1.4 bar)
Filter Cartridge Dimensions:
Hight 9.78" Diameter 3"
It can be easily back washed. Semi annually back washing of the unit not
only ensures balanced filtration and eliminates the potential for
channeling, but also back-flushes the unit.
All Our Replacement Cartridge Filters
Jupiter Aquarius JP108|Jupiter
Orion JP109|Jupiter Melody JP104|AthenaJupiter
Far Infrared |
Copyright 2014, MicroWaterMan.com, All Rights